Most Asked: Do KICK-EEZ® Recoil Pads Fit the GraCoil® Reduction System?

The most frequently asked question we received for the month of April, 2016 was: Do KICK-EEZ® Recoil Pads Fit the Graco Corporation Gracoil® Reduction System? The answer to this question is positively YES! Graco Corporation does make more than one aluminum plate that KICK-EEZ recoil pads mount to. However, the good news is that regardless of what aluminum plate they use in their GraCoil system, KICK-EEZ recoil pads have the same screw hole separation of 3 1/8” apart, center-to-center. Note: You will want to use Gracoil’s screws to mount our recoil pads because their screws have SAE threads, and are guaranteed the proper length. KICK-EEZ Grind-To-Fit Recoil Pads size Large are 5 5/8” long x 2” wide, whereas our Medium-sized Grind-To-Fit recoil pads are 5 1/4” long x 1 7/8” wide. To select the correct KICK-EEZ recoil pad for your Graco GraCoil setup, simply measure your aluminum plate and that will help determine if you need one of our Large or Medium GTF Pads.

Remember, since KICK-EEZ recoil pads don’t contain steel plates (or hollow spots), you can do whatever is necessary to match them to Gracoil’s aluminum plate as part of the Gracoil Reduction System!