Using KICK-EEZ Spacers to Obtain a Proper Gun Fit
Ensuring a proper gun fit for any shooter is critical for all successful shooting endeavors, and Length-of-Pull (LOP) is an important part of this equation. If you don’t want to replace the recoil pad on your gun, the easiest and most cost effective way to increase your LOP can be accomplished by using KICK-EEZ® Flat Spacers.

All About KICK-EEZ Spacers

KICK-EEZ® Spacers are made from a strong, lightweight plastic polymer. They’re easy to customize for a perfect fit, and every spacer we sell has superior machining and sanding characteristics to ensure the impeccable finish you’re looking for. Because screw hole locations vary drastically from one gun stock manufacturer to another, the universal slotted holes at each end of our KICK-EEZ spacers make it easy to match almost any screw hole location. KICK-EEZ® Spacers are available in thicknesses of:
  • 1/8” (Item #701-180)
  • 1/4” (Item #701-140)
  • 1/2” (Item #701-120)
To achieve that perfect feel when adjusting your LOP, a combination of spacers and your existing recoil pad may be what you’re looking for. Tip: You can glue the spacers to your pad and then sand them to match your stock, or you can sand them separately so you can remove them if necessary during winter shooting when heavier clothing is worn and you may want to slightly decrease your LOP.

Don't Forget About Pitch

KICK-EEZ® also sells Pitch Spacers made of the same plastic polymer. Pitch is the angle at which the recoil pad sits on the stock to direct the actual recoil energy that is generated when you fire your shotgun or rifle. This is especially important because pitch can control how the recoil shock is received against your shoulder. Proper pitch can help in managing recoil, preparation between shots and it also provides shooters with greater overall comfort for more enjoyable shooting endeavors. KICK-EEZ® Pitch Spacers can be mounted either up or down, creating either positive or negative pitch. KICK-EEZ® Pitch Spacers are available in thicknesses of:
  • 1/4” (Item #105-140)
  • 1/2” (Item #105-120)
Please keep in mind the thickness of our KICK-EEZ® Pitch Spacers is measured at the heel of the spacer and then tapers down to approximately 1/32” at the toe. Installation of KICK-EEZ® Pitch Spacers is the same as the installation for our KICK-EEZ® Flat Spacers.

KICK-EEZ Recoil Pads

If you're also looking to add a new recoil pad to your rifle or shotgun, remember KICK‑EEZ® Recoil Pads are made of solid Sorbothane. They contain no steel plates or hollow spots, so they can be sanded as needed to fit your Beretta stock. We offer one-on-one technical support and pride ourselves in offering personal, responsive support to answer each and every question you have so that all your shooting experiences can be as enjoyable as possible!
Category_blog>kick-eez® most asked