Installation
Most people choose to slide the KICK-EEZ® Slip-Over Recoil System right over the existing recoil pad on their gun; however, removing the existing pad is strictly a personal choice. The 4” durable black rubber boot and the 1/2” Sorbothane insert will add 5/8” to your existing LOP and reduce recoil considerably. Additional 1/4” Sorbothane® inserts are sold separately that provide extra relief. By adding or combining extra KICK-EEZ® inserts to your Slip-Over Pad, your LOP can easily be adjusted. These inserts are sold in a package that contains two 1/4” inserts; adding both inserts to the KICK-EEZ® Slip-Over Recoil System will add an extra 1/2” to your LOP and provide additional recoil reduction. Simply stack one or both of the extra inserts on top of the original 1/2” Sorbothane insert.
Sizing
To determine which size KICK-EEZ® Slip-Over Recoil System to purchase, measure the length and the width of the butt face of your gun. If you can’t quite decide which one to order, it is best to choose the smaller size because you want the pad to fit snug. The sizes for the KICK-EEZ® Slip-Over Recoil System are as follows:- Small: 4 1/2” x 1 1/2” up to 4 13/16” x 1 5/8”
- Medium: 4 13/16” x 1 5/8” up to 5 1/8” x 1 3/4”
- Large: 5 1/8” x 1 3/4” up to 5 3/8” x 1 7/8”