Pre-fit KZ 105 Recoil Pad

Kick-EEZSKU: KZ-105



Download Printable Template

Many stock manufacturers modify their stock dimensions yearly, making it extremely challenging for us to keep one particular model available for one specific manufacturer. In response, we have created 19 templates to assist you in matching your gun stock butt to the correct KICK-EEZ® Pre-Fit Pad. To ensure a proper fit, be sure to check the templates for ALL stocks and models of stocks!

KICK-EEZ® Pre-Fit Pads are designed to fit many shotguns and rifles. Due to manufacturer stock variations, our templates will help match the appropriate pad to your stock. Place the gun butt or current pad over each template until a match is found. The Model # is located on each template for easy ordering.

GRINDING KICK-EEZ PRE-FIT & GRIND-TO-FIT PADS To grind a KICK-EEZ® Pad, a disc or belt sander works best. Install the new pad on your stock and scribe a pencil line around the stock, then remove the pad. Start with 80 or 100 grit sand paper. Patience is the key; make several passes to reduce heat buildup. Finish sanding your pad with 220 or 400 grit sand paper. Radius the edges of the pad with 220 grit or a scotch brite pad.
> Most Pre-Fit Pads are 1-1/8" thick except the KZ-115 and the KZ-119; they are both 15/16" thick.

>The hole spacing for the KZ-105 is 3 3/8"


Make  and Model  Stock Pad
CVA Wolf Muzzleloader '96
CVA Eclipse Hunter ML
Synth KZ-105
Mossberg Maverick 88 20 Ga. Some KZ-105
Ruger 77 Some KZ-105
Ruger Mark II Some KZ-105
Sako 75 Wood KZ-105
Sako Finnlight Some KZ-105
Savage Most Models  Synth KZ-105
Stevens Model 200 Most Models Synth KZ-105
Stoeger Uplander 12 Ga. SXS Stan
Wood KZ-105
TIKKA T3 Wood KZ-105
Weatherby PA-08 12 Ga.  Some KZ-105
Winchester Supreme Select Sport O/U Wood KZ-105
Winchester Model 1400 Wood KZ-105
Winchester Model 670 Wood KZ-105
Winchester Model 70 Featherweight Wood KZ-105
Winchester Model 70 Synth KZ-105
Winchester Model X-1 Wood


Customer Reviews

Based on 1 review
Scott J.
Close but but not close enough for my liking.

The website said it was a close fir for a stoeger uplander. Well it did fit but I would say it was off by about a 1/16" or so. Being my OCD kicked in I took it off and ordered a grind to fit and a grinding jig. Iike those results much better. No knock against the pad supllied. They did say it was a close fit, not an exact.

Payment & Security

American Express Diners Club Discover JCB Mastercard PayPal Venmo Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently viewed