Many stock manufacturers modify their stock dimensions yearly, making it extremely challenging for us to keep one particular model available for one specific manufacturer. In response, we have created 19 templates to assist you in matching your gun stock butt to the correct KICK-EEZ® Pre-Fit Pad. To ensure a proper fit, be sure to check the templates for ALL stocks and models of stocks!
KICK-EEZ® Pre-Fit Pads are designed to fit many shotguns and rifles. Due to manufacturer stock variations, our templates will help match the appropriate pad to your stock. Place the gun butt or current pad over each template until a match is found. The Model # is located on each template for easy ordering.
GRINDING KICK-EEZ PRE-FIT & GRIND-TO-FIT PADS To grind a KICK-EEZ® Pad, a disc or belt sander works best. Install the new pad on your stock and scribe a pencil line around the stock, then remove the pad. Start with 80 or 100 grit sandpaper. Patience is the key; make several passes to reduce heat buildup. Finish sanding your pad with 220 or 400 grit sandpaper. Radius the edges of the pad with 220 grit or a scotch brite pad.
> 1-1/8" thick
- Marlin Model XS 7 Synthetic Stock Recoil Pad
- Remington Model 700 Synthetic Stock Recoil Pad
- Remington Model 700 ADL/BDL/ML 710, 770, 7600, 1100 12GA and 16GA Synthetic Stock Recoil Pad
The KZ-108 did not fit length wise about a 16th to 1/8 short on my 20 ga. Citori. The width was ok. Also had to drill one hole at bottom.
The KZ 117 did not fit width wise about a 16th to 1/8 short on my 20 ga. Citori. The length was close but appears to be about a 16th short on my 12ga.1100. Also, the holes do not line up top or bottom. (I did not install this pad)
The pad itself looks to be high quality.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.